Specification
Value
Gross Power - SAE J1995
74.3 HP
Net Power - SAE 1349
73.2 HP
Displacement
203 in³
Stroke
4.7 in
Bore
3.7 in
Net Flywheel Power
73.2 HP
Engine Model
Cat 3.3B DIT (turbo)
Peak Torque - 1,500 rpm - SAE J1995
195 ft·lbf
Net Power - ISO 9249
73.9 HP
Specification
Value
Rated Operating Capacity
1800 lb
Tipping Load
3600 lb
Breakout Force - Tilt Cylinder
5003 lb
Rated Operating Capacity with Optional Counterweight
2000 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Specification
Value
Operating Weight
6567 lb
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Specification
Value
Wheel Base
43.5 in
Height - Top of Cab
82 in
Vehicle Width over Tires
66 in
Ground Clearance
7.7 in
Departure Angle
26°
Maximum Dump Angle
48°
Maximum Reach - With Arms Parallel to Ground
53.3 in
Turning Radius from Center - Machine Rear
64.5 in
Bucket Pin Height - Maximum Lift
122.9 in
Length - Without Bucket
108.9 in
Rack Back Angle - Maximum Height
91°
Turning Radius from Center - Bucket
83 in
Turning Radius from Center - Coupler
51.8 in
Clearance at Maximum Lift and Dump
92.9 in
Reach - Maximum Lift/Dump
16 in
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Bumper Overhang - Behind Rear Axle
40.2 in
Maximum Overall Height
156.6 in
Length - With Bucket on Ground
137.3 in
Bucket Pin Height - Carry Position
7.5 in
Specification
Value
Hydraulic Flow - Standard - Loader Hydraulic Flow
20 gal/min
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
39 HP
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
30 gal/min
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
58 HP
Specification
Value
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level I
Specification
Value
Travel Speed - Forward or Reverse - Two Speed Option
10.6 mile/h
Travel Speed - Forward or Reverse - One Speed
7 mile/h
Specification
Value
Chain Box - Each Side
2.3 gal (US)
Cooling System
3.7 gal (US)
Engine Crankcase
3 gal (US)
Fuel Tank
24.8 gal (US)
Hydraulic System
13.2 gal (US)
Hydraulic Tank
10.3 gal (US)
Specification
Value
Outside Cab**
101 dB(A)
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Inside Cab*
83 dB(A)
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Specification
Value
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
The industry leading sealed and pressurized cab option provides the operator with a cleaner and quieter operating environment with excellent work tool visibility. Continuing the industry leading trend, the D3 Series also includes as standard, seat mounted adjustable joystick controls for operator comfort.
High performance power train provides maximum performance and production capability through the Electronic Torque Management system, standard two speed travel and an electronic hand/foot throttle with decel pedal capability.
Cat® “Intelligent Leveling” system provides industry leading technology, integration, and available features such as dual direction self level, work tool return to dig, and work tool positioner.
Maximize machine capability and control with the available Advanced Display, providing on-screen adjustments for implement response, hystat response and creep control. Also features multi-language functionality with customizable layouts, security system and rearview camera.
A standard, Speed Sensitive Ride Control system improves operation on rough terrain, enabling better load retention, increased productivity and greater operator comfort. (Photo shown may vary from machine referenced.)
- The Cat® C3.3B engine meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: 7% biodiesel FAME (fatty acid methyl ester). Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details.
- Cat® Extended Life Coolant and long-life HYDO Advanced hydraulic fluids not only reduce downtime but help decrease the amount of fluid and filters that are replaced over the life of the machine.
- Boost productivity with Cat technologies like work tool positioner, return to dig, and Cat Smart Attachments.
- Save fuel and reduce your greenhouse gas emissions with efficiency features such as foot throttle pedal and cooling system demand fan.