COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Skid Steer Loaders
236D3
ADD MODEL
ADD MODEL
Gross Power - SAE J1995
74.3 HP
Na
Na
Net Power - SAE 1349
73.2 HP
Na
Na
Displacement
203 in³
Na
Na
Stroke
4.7 in
Na
Na
Bore
3.7 in
Na
Na
Net Flywheel Power
73.2 HP
Na
Na
Engine Model
Cat 3.3B DIT (turbo)
Na
Na
Peak Torque - 1,500 rpm - SAE J1995
195 ft·lbf
Na
Na
Net Power - ISO 9249
73.9 HP
Na
Na
Rated Operating Capacity
1800 lb
Na
Na
Tipping Load
3600 lb
Na
Na
Breakout Force - Tilt Cylinder
5003 lb
Na
Na
Rated Operating Capacity with Optional Counterweight
2000 lb
Na
Na
Operating Weight
6567 lb
Na
Na
Wheel Base
43.5 in
Na
Na
Height - Top of Cab
82 in
Na
Na
Vehicle Width over Tires
66 in
Na
Na
Ground Clearance
7.7 in
Na
Na
Departure Angle
26°
Na
Na
Maximum Dump Angle
48°
Na
Na
Maximum Reach - With Arms Parallel to Ground
53.3 in
Na
Na
Turning Radius from Center - Machine Rear
64.5 in
Na
Na
Bucket Pin Height - Maximum Lift
122.9 in
Na
Na
Length - Without Bucket
108.9 in
Na
Na
Rack Back Angle - Maximum Height
91°
Na
Na
Turning Radius from Center - Bucket
83 in
Na
Na
Turning Radius from Center - Coupler
51.8 in
Na
Na
Clearance at Maximum Lift and Dump
92.9 in
Na
Na
Reach - Maximum Lift/Dump
16 in
Na
Na
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Na
Na
Bumper Overhang - Behind Rear Axle
40.2 in
Na
Na
Maximum Overall Height
156.6 in
Na
Na
Length - With Bucket on Ground
137.3 in
Na
Na
Bucket Pin Height - Carry Position
7.5 in
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Flow
20 gal/min
Na
Na
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure
3335 psi
Na
Na
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
39 HP
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Na
Na
Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow
30 gal/min
Na
Na
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
58 HP
Na
Na
ROPS
ISO 3471:2008
Na
Na
FOPS
ISO 3449:2005 Level I
Na
Na
Travel Speed - Forward or Reverse - Two Speed Option
10.6 mile/h
Na
Na
Travel Speed - Forward or Reverse - One Speed
7 mile/h
Na
Na
Chain Box - Each Side
2.3 gal (US)
Na
Na
Cooling System
3.7 gal (US)
Na
Na
Engine Crankcase
3 gal (US)
Na
Na
Fuel Tank
24.8 gal (US)
Na
Na
Hydraulic System
13.2 gal (US)
Na
Na
Hydraulic Tank
10.3 gal (US)
Na
Na
Outside Cab**
101 dB(A)
Na
Na
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Na
Na
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Na
Na
Inside Cab*
83 dB(A)
Na
Na
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Na
Na
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Na
Na