COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Motor Graders
14
ADD MODEL
ADD MODEL
Base Power (1st Gear) - Net
238 HP
Na
Na
Engine Model
Cat C13
Na
Na
Bore
5.1 in
Na
Na
Stroke
6.2 in
Na
Na
Speed at Rated Power
1,850 rpm
Na
Na
Note (3)
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Na
Na
Standard Capability
122 °F
Na
Na
Note (2)
Optimized VHP Plus is standard for the 14M3.
Na
Na
Torque Rise
41%
Na
Na
Maximum Altitude - Full Power
13900 ft
Na
Na
Maximum Torque - VHP Plus
1137 lb/ft
Na
Na
Emissions
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Na
Na
Maximum Altitude - Full Power (Tier 3)
14349 ft
Na
Na
Maximum Altitude - Full Power (Tier 2)
12049 ft
Na
Na
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Na
Na
Standard - Fan Speed - Minimum
550 rpm
Na
Na
Note (4)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Na
Na
Displacement
763 in³
Na
Na
Number of Cylinders
6
Na
Na
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Na
Na
Standard - Fan Speed - Maximum
1,600 rpm
Na
Na
Circle - Outer Diameter
71.7 in
Na
Na
Front Axle - Wheel Lean - Left/Right
17.1°
Na
Na
Front Axle - Total Oscillation per Side
32°
Na
Na
Transmission and Differential
23.5 gal (US)
Na
Na
Diesel Exhaust Fluid Tank (Tier 4 Only)
5.8 gal (US)
Na
Na
Hydraulic System
33 gal (US)
Na
Na
Circle Drive
1.8 gal (US)
Na
Na
Cooling System
15.9 gal (US)
Na
Na
Fuel Tank
109.9 gal (US)
Na
Na
Blade Width
14 ft
Na
Na
Arc Radius
16.3 in
Na
Na
Throat Clearance
4.6 in
Na
Na
Blade Width - With End Bits
169 in
Na
Na
Blade Height - With Cutting Edge
24.9 in
Na
Na
Blade Width - Without End Bits
164 in
Na
Na
Blade Height - Without Cutting Edge
23 in
Na
Na
Maximum Depth of Cut
23.3 in
Na
Na
Circle Centershift - Left
25.6 in
Na
Na
Maximum Lift Above Ground
16.5 in
Na
Na
Circle Centershift - Right
20.5 in
Na
Na
Blade Tip Range - Backward
5°
Na
Na
Maximum Shoulder Reach Outside of Tires - Right
78.9 in
Na
Na
Moldboard Sideshift - Right
31.1 in
Na
Na
Moldboard Sideshift - Left
29.1 in
Na
Na
Maximum Shoulder Reach Outside of Tires - Left
73.6 in
Na
Na
Blade Tip Range - Forward
40°
Na
Na
Operating Weight - Typically Equipped
57250 lb
Na
Na
Gross Vehicle Weight - Base* - Total
50980 lb
Na
Na
Gross Vehicle Weight - Base* - Front Axle
13994 lb
Na
Na
Gross Vehicle Weight - Typically Equipped - Total
57250 lb
Na
Na
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005 lb
Na
Na
Gross Vehicle Weight - Typically Equipped - Front Axle
15245 lb
Na
Na
Gross Vehicle Weight - Base* - Rear Axle
36994 lb
Na
Na
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Na
Na
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
Na
Na