Home > Products > Compare
COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same time.
Skid Steer Loaders
272D3
ADD MODEL
ADD MODEL
Gross Power - SAE J1995
98 HP
Na
Na
Net Power - SAE 1349
95 HP
Na
Na
Displacement
232 in³
Na
Na
Stroke
4.7 in
Na
Na
Bore
3.9 in
Na
Na
Peak Torque - 1,500 rpm - SAE J1995
246 ft·lbf
Na
Na
Engine Model
Cat C3.8 DIT (turbo)
Na
Na
Net Power - ISO 9249
96 HP
Na
Na
Net Flywheel Power
95 HP
Na
Na
Rated Operating Capacity
3450 lb
Na
Na
Tipping Load
6900 lb
Na
Na
Breakout Force - Tilt Cylinder
7443 lb
Na
Na
Breakout Force - Lift Cylinder
6074 lb
Na
Na
Rated Operating Capacity with Optional Counterweight
3690 lb
Na
Na
Operating Weight
9133 lb
Na
Na
Wheel Base
54.6 in
Na
Na
Height - Top of Cab
82.4 in
Na
Na
Vehicle Width over Tires
72 in
Na
Na
Ground Clearance
8.9 in
Na
Na
Departure Angle
27°
Na
Na
Maximum Dump Angle
51°
Na
Na
Bucket Pin Reach - Maximum Lift
14.7 in
Na
Na
Bucket Pin Height - Maximum Lift
127.1 in
Na
Na
Turning Radius from Center - Machine Rear
74.7 in
Na
Na
Reach - Maximum Lift/Dump
30.3 in
Na
Na
Bumper Overhang - Behind Rear Axle
46.2 in
Na
Na
Length - Without Bucket
127.6 in
Na
Na
Maximum Overall Height
160.1 in
Na
Na
Turning Radius from Center - Coupler
58.3 in
Na
Na
Maximum Reach - With Arms Parallel to Ground
50.5 in
Na
Na
Clearance at Maximum Lift and Dump
96 in
Na
Na
Length - With Bucket on Ground
155.7 in
Na
Na
Bucket Pin Height - Carry Position
7.8 in
Na
Na
Turning Radius from Center - Bucket (racked)
89.8 in
Na
Na
Rack Back Angle - Maximum Height
84°
Na
Na
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, enclosed cab with glass door, side windows, heater, mechanical suspension seat, advanced display, standard flow hydraulics, 850 CCA battery, 1883 mm (74 in) low profile bucket, no optional counterweights, Cat PC 12 × 16.5 tires and manual quick coupler (unless otherwise noted).
Na
Na
Roll Back Angle
28°
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Flow
23 gal/min
Na
Na
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
76 HP
Na
Na
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
44 HP
Na
Na
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
32 gal/min
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Na
Na
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
4061 psi
Na
Na
ROPS
ISO 3471:2008
Na
Na
FOPS
ISO 3449:2005 Level I
Na
Na
Travel Speed - Forward or Reverse - One Speed
6.6 mile/h
Na
Na
Travel Speed - Forward or Reverse - Two Speed Option
9.4 mile/h
Na
Na
Cooling System
4.1 gal (US)
Na
Na
Engine Crankcase
3.5 gal (US)
Na
Na
Fuel Tank
31.7 gal (US)
Na
Na
Hydraulic System
14.5 gal (US)
Na
Na
Hydraulic Tank
10.3 gal (US)
Na
Na
Chain Box - Each Side
2.7 gal (US)
Na
Na
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Na
Na
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.
Na
Na
Outside Cab**
102 dB(A)
Na
Na
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Na
Na
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Na
Na
Inside Cab*
83 dB(A)
Na
Na
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Na
Na