Home > Products > Compare
COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same time.
Skid Steer Loaders
262D3
ADD MODEL
ADD MODEL
Gross Power - SAE J1995
74.3 HP
Na
Na
Net Power - SAE 1349
72.9 HP
Na
Na
Displacement
203 in³
Na
Na
Stroke
4.7 in
Na
Na
Bore
3.7 in
Na
Na
Peak Torque - 1,500 rpm - SAE J1995
195 ft·lbf
Na
Na
Net Power - ISO 9249
73.7 HP
Na
Na
Engine Model
Cat C3.3B DIT (turbo)
Na
Na
Net Flywheel Power
72.9 HP
Na
Na
Rated Operating Capacity
2700 lb
Na
Na
Rated Operating Capacity with Optional Counterweight
3055 lb
Na
Na
Tipping Load
5400 lb
Na
Na
Breakout Force - Tilt Cylinder
7355 lb
Na
Na
Operating Weight
8296 lb
Na
Na
Wheel Base
49.2 in
Na
Na
Length - With Bucket on Ground
146.2 in
Na
Na
Length - Without Bucket
117.9 in
Na
Na
Height - Top of Cab
83.1 in
Na
Na
Vehicle Width over Tires
66 in
Na
Na
Maximum Overall Height
157.8 in
Na
Na
Bucket Pin Height - Maximum Lift
124.9 in
Na
Na
Bucket Pin Height - Carry Position
7.9 in
Na
Na
Reach - Maximum Lift/Dump
30.9 in
Na
Na
Clearance at Maximum Lift and Dump
93.7 in
Na
Na
Ground Clearance
8.9 in
Na
Na
Departure Angle
26°
Na
Na
Bumper Overhang - Rear Axle
42.6 in
Na
Na
Maximum Dump Angle
51°
Na
Na
Rack Back Angle - Maximum Height
84°
Na
Na
Bucket Pin Reach - Maximum Lift
15.5 in
Na
Na
Turning Radius from Center - Bucket
85.9 in
Na
Na
Turning Radius from Center - Coupler
55.2 in
Na
Na
Note
Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat PC 12 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counterweights and manual quick coupler (unless otherwise noted).
Na
Na
Maximum Reach - With Arms Parallel to Ground
50.9 in
Na
Na
Turning Radius from Center - Machine Rear
71.1 in
Na
Na
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Pressure
4061 psi
Na
Na
Hydraulic Flow - High Flow XPS - Hydraulic Power (Calculated)
76 HP
Na
Na
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
44 HP
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3335 psi
Na
Na
Hydraulic Flow - Standard - Loader Hydraulic Flow
23 gal/min
Na
Na
Hydraulic Flow - High Flow XPS - Maximum Loader Hydraulic Flow
32 gal/min
Na
Na
ROPS
ISO 3471:2008
Na
Na
FOPS
ISO 3449:2005 Level I
Na
Na
Travel Speed - Forward or Reverse - Two Speed Option
11 mile/h
Na
Na
Travel Speed - Forward or Reverse - One Speed
7.7 mile/h
Na
Na
Chain Box - Each Side
3.3 gal (US)
Na
Na
Cooling System
3.7 gal (US)
Na
Na
Engine Crankcase
3 gal (US)
Na
Na
Fuel Tank
27.7 gal (US)
Na
Na
Hydraulic System
13.7 gal (US)
Na
Na
Hydraulic Tank
10.3 gal (US)
Na
Na
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Na
Na
Inside Cab*
81 dB(A)
Na
Na
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Na
Na
Outside Cab**
101 dB(A)
Na
Na
Note (3)
**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.
Na
Na
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Na
Na