COMPARE MODELS
Our product comparison allows for the review of up to 3 related models technical specifications at the same
time.
Three Axle Articulated Trucks
725
ADD MODEL
ADD MODEL
Engine Model
Cat C9.3
Na
Na
Bore
4.5 in
Na
Na
Stroke
45.2 in
Na
Na
Displacement
567.5 in³
Na
Na
Peak Engine Torque Gross (SAE J1995)
1275 ft·lbf
Na
Na
Gross Power - SAE J1995
342 HP
Na
Na
Net Power - ISO 14396
338 HP
Na
Na
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV
Cat® C9.3
Na
Na
No Engine De-rating Below
3000 ft
Na
Na
Peak Engine Torque Net (SAE J1349)
1263 ft·lbf
Na
Na
Net Power - SAE J1349
334 HP
Na
Na
Peak Engine Torque Speed
1200 r/min
Na
Na
Note (1)
The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.
Na
Na
Emissions
The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Na
Na
Note (3)
Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Na
Na
Note (2)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Na
Na
Note (4)
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.
Na
Na
Rated Payload
26.5 ton (US)
Na
Na
Heaped (SAE 2:1)
19.6 yd³
Na
Na
Struck
14.4 yd³
Na
Na
Tailgate Heaped SAE 2:1
20.4 yd³
Na
Na
Tailgate Struck
14.5 yd³
Na
Na
Forward - 1
5 mT/hr
Na
Na
Forward - 2
9.4 mT/hr
Na
Na
Forward - 3
14.4 mT/hr
Na
Na
Forward - 4
22.1 mT/hr
Na
Na
Forward - 5
30.7 mT/hr
Na
Na
Forward - 6
36.3 mT/hr
Na
Na
Reverse - 1
5.5 mT/hr
Na
Na
Interior Cab
69 dB(A)
Na
Na
Total - Loaded
103886 lb
Na
Na
Rear Axle - Rated Load
23699 lb
Na
Na
Total - Empty
50975 lb
Na
Na
Total - Rated Load
52910 lb
Na
Na
Center Axle - Loaded
33944 lb
Na
Na
Front Axle - Rated Load
5511 lb
Na
Na
Center Axle - Rated Load
23699 lb
Na
Na
Center Axle - Empty
10242 lb
Na
Na
Rear Axle - Loaded
33457 lb
Na
Na
Front Axle - Loaded
36484 lb
Na
Na
Rear Axle - Empty
9757 lb
Na
Na
Front Axle - Empty
30974 lb
Na
Na
Side Plates
0.43 in
Na
Na
Front Plate
0.28 in
Na
Na
Base Plate
0.51 in
Na
Na
Fuel Tank
91.0 gal (US)
Na
Na
Cooling System
18.0 gal (US)
Na
Na
Hydraulic System
29.1 gal (US)
Na
Na
Engine Crankcase
8 gal (US)
Na
Na
Transmission
10.0 gal (US)
Na
Na
Final Drives/Differential
33 gal (US)
Na
Na
Output Transfer Gear Box
5.0 gal (US)
Na
Na
DEF Tank
4.0 gal (US)
Na
Na
Steering/Hoist Hydraulic System
24.0 gal (US)
Na
Na
Final Drive - Each
1.6 gal (US)
Na
Na
Raise Time
10 s
Na
Na
Lower Time
8 s
Na
Na
Lock to Lock
4.75 seconds @ 60 rpm
Na
Na
Brakes
ISO 3450 – 2011
Na
Na
Cab - FOPS
ISO 3449 Level II – 2008
Na
Na
Cab - ROPS
ISO 3471 – 2008
Na
Na
Steering
ISO 5010 – 2007
Na
Na
Type
High strength Brinell HB450 wear resistant steel
Na
Na
Turning Dimensions - Inside Radius
153 in
Na
Na
Turning Dimensions - Aisle Width
210 in
Na
Na
Turning Dimensions - SAE Turning Radius
294 in
Na
Na
Turning Dimensions - Clearance Radius
318 in
Na
Na
Turning Dimensions - Steer Angle - Left/Right
45°
Na
Na
Note
Dimensions are for machines equipped with 23.5R25 tires.
Na
Na
Wheel Loader: 950M - Passes
5
Na
Na
Wheel Loader: 962M - Passes
4-5
Na
Na
Wheel Loaders: 966M/966M XE - Passes
4
Na
Na
Hydraulic Excavators: 336F/336F XE - Passes
5-6
Na
Na
Wheel Loaders: 972M/972M XE - Passes
3-4
Na
Na
Hydraulic Excavators: 349F/349F XE - Passes
4-5
Na
Na