Jallad | Products

Engine Model

Cat C9.3

Bore

4.5 in

Stroke

45.2 in

Displacement

567.5 in³

Peak Engine Torque Gross (SAE J1995)

1275 ft·lbf

Gross Power - SAE J1995

342 HP

Net Power - ISO 14396

338 HP

Engine Model - U.S. EPA Tier 4 Final/EU Stage IV

Cat® C9.3

No Engine De-rating Below

3000 ft

Peak Engine Torque Net (SAE J1349)

1263 ft·lbf

Net Power - SAE J1349

334 HP

Peak Engine Torque Speed

1200 r/min

Note (1)

The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and maintained.

Emissions

The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.

Note (3)

Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.

Note (2)

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Note (4)

DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

Rated Payload

26.5 ton (US)

Heaped (SAE 2:1)

19.6 yd³

Struck

14.4 yd³

Tailgate Heaped SAE 2:1

20.4 yd³

Tailgate Struck

14.5 yd³

Forward - 1

5 mT/hr

Forward - 2

9.4 mT/hr

Forward - 3

14.4 mT/hr

Forward - 4

22.1 mT/hr

Forward - 5

30.7 mT/hr

Forward - 6

36.3 mT/hr

Reverse - 1

5.5 mT/hr

Interior Cab

69 dB(A)

Total - Loaded

103886 lb

Rear Axle - Rated Load

23699 lb

Total - Empty

50975 lb

Total - Rated Load

52910 lb

Center Axle - Loaded

33944 lb

Front Axle - Rated Load

5511 lb

Center Axle - Rated Load

23699 lb

Center Axle - Empty

10242 lb

Rear Axle - Loaded

33457 lb

Front Axle - Loaded

36484 lb

Rear Axle - Empty

9757 lb

Front Axle - Empty

30974 lb

Side Plates

0.43 in

Front Plate

0.28 in

Base Plate

0.51 in

Fuel Tank

91.0 gal (US)

Cooling System

18.0 gal (US)

Hydraulic System

29.1 gal (US)

Engine Crankcase

8 gal (US)

Transmission

10.0 gal (US)

Final Drives/Differential

33 gal (US)

Output Transfer Gear Box

5.0 gal (US)

DEF Tank

4.0 gal (US)

Steering/Hoist Hydraulic System

24.0 gal (US)

Final Drive - Each

1.6 gal (US)

Raise Time

10 s

Lower Time

8 s

Lock to Lock

4.75 seconds @ 60 rpm

Brakes

ISO 3450 – 2011

Cab - FOPS

ISO 3449 Level II – 2008

Cab - ROPS

ISO 3471 – 2008

Steering

ISO 5010 – 2007

Type

High strength Brinell HB450 wear resistant steel

Turning Dimensions - Inside Radius

153 in

Turning Dimensions - Aisle Width

210 in

Turning Dimensions - SAE Turning Radius

294 in

Turning Dimensions - Clearance Radius

318 in

Turning Dimensions - Steer Angle - Left/Right

45°

Note

Dimensions are for machines equipped with 23.5R25 tires.

Wheel Loader: 950M - Passes

Wheel Loader: 962M - Passes

4-5

Wheel Loaders: 966M/966M XE - Passes

Hydraulic Excavators: 336F/336F XE - Passes

5-6

Wheel Loaders: 972M/972M XE - Passes

3-4

Hydraulic Excavators: 349F/349F XE - Passes

4-5

Engine

Weights

Body Capacities

Transmission

Sound Levels

Operating Weights

Body Plate Thickness

Service Refill Capacities

Body Hoist

Steering

Standards

Body Plate

Turning Circle

Optimal Loader/Truck Pass Matching