OVERVIEW
In face conveyor or plow automation systems the Cat® PMC-V provides the human machine interface (HMI) to interact with the PMC-D drive controls to operate manual mode, visualize and change parameters and show actual process values. Within a PMC-D system minimum one and typically up to 3 PMC-Vs are in equal operation.
Components
Processor
32Bit RISC Microcontroller TX1940CYAF, 32MHz, internal RAM 10Kbytes, ROM 256Kbytes
RAM Memory
4Mbytes CMOS Static RAM, 4Mbytes Flash
Operating System
µITRON RTOS
Dimensions (Approximate)
Main Technical Data
Components
320 × 240 pixel b/w graphics display
Components
12 SKK24 sockets for power supply, communication, sensors and actuators
Components
Optional additional Profibus communication channel for communication with third party computer
Global Certifications
Types
Australia: IECEx, ANZEx
Types
More certifications on demand
Electrical Data
Supply Voltage - Typical Value
12 V DC
Supply Voltage - Maximum Ratings
9.5 V - 13.2 V
Supply Current - Typical Value
1.0 amps
Supply Current - Maximum Ratings
1.5 amps
Environmental Data
Temperature - Symbol
Tamb
Temperature - Typical Value
20.0 ° C
Temperature - Maximum Ratings
-20° C - +40° C (-4° F - +104° F)
Electrical Sockets
Socket 1 - Pin 1
Optocoupler Anode
Socket 1 - Pin 2
Relay Contact NO: a
Socket 1 - Pin 3
Relay Contact NO: b
Socket 1 - Pin 4
Optocoupler Kathode
Socket 2 - Pin 1
+12 V (A)
Socket 2 - Pin 2
Serial Interface: RxD
Socket 2 - Pin 3
Serial Interface: TxD
Socket 3 - Pin 1
+12 V (B)
Socket 3 - Pin 2
Serial Interface: RxD
Socket 3 - Pin 3
Serial Interface: TxD
Socket 4 - Pin 1
+12 V (C)
Socket 4 - Pin 2
Serial Interface: RxD
Socket 4 - Pin 3
Serial Interface: TxD
Socket 6 - Pin 2
Profibus: a (internal)
Socket 6 - Pin 3
Profibus: b (internal)
Socket 7 - Pin 1
+12 V Input
Socket 7 - Pin 2
Serial Interface: TxD
Socket 7 - Pin 3
Serial Interface: RxD
Socket 7 - Pin 4
GND Input
Socket 8 - Pin 1
+12 V (B)
Socket 8 - Pin 2
Measurement Input 1
Socket 9 - Pin 1
+12 V (C)
Socket 9 - Pin 2
Measurement Input 2
Socket 10 - Pin 1
+12 V (A)
Socket 10 - Pin 2
Measurement Input 3
Socket 11 - Pin 1
Options
Socket 11 - Pin 2
Options
Socket 11 - Pin 3
Options
Socket 11 - Pin 4
Options
Socket 12 - Pin 2
Profibus: a (internal)
Socket 12 - Pin 3
Profibus: b (internal)
Options (Designations of options equal the second and third to last characters of type designation listed on equipment.)
Socket 5 - Pin 2
AB (Profibus: a [external])
Socket 5 - Pin 3
AB (Profibus: b [external])
Socket 11 - Pin 2
AB (Profibus: a [external])
Socket 11 - Pin 3
AB (Profibus: b [external])